1 Dynamic Autofocus
With the third generation of dynamic autofocus technology, the
accurate position measuring system of Amsky equipments can directly
detect such minute distance change as 0.1 microns. Driven by voice
coil motor, they can also trace any change in focal length at an
incredible acceleration of 30G in order to ensure the continuous
accuracy of focal length. The combination of these unique features
not only guarantees the deviation of density between any two spots
is less than 0.3% in a full page of tint, but also avoids blue
marks and blurs caused by tiny dusts on the drum surface.
2 Fast Balance &Auto Switch of Laser Beam
During the plate loading and unloading period, our laser beam
balancing system can accomplish the detection and adjustments of
all laser energy within few seconds. Laser power can be calibrated
automatically before exposing plate every time without any
influence in the speed of outputting plates, to ensure each laser
burning one the plate with same power, all lines and screen spots
are full and identical on every plate.
When any laser channel breaks down, laser beam auto switch system
can continue outputting through the rest longest consecutive
channel in order to ensure non-stop production and offer users
stable and superior practical experience.
3 Auto Constant Thermostatic Control of Laser Chassis
The temperature control system in laser thermostatic shielding
chassis can automatically make two-way adjustment to the inside
temperature with a minimum accuracy of positive or negative 0.1
degrees. Under optimum temperature conditions, output of laser is
more stable and the life of laser is greatly lengthened,
4 Technology of DDS Frequency Multiplication and Drum Auto Balance
The technology of DDS frequency multiplication ensures phase
position to jitter within 0.03125 pixels and exposed lines to be
both vertical and horizontal.
Auto balance system of drum takes no more than 5 seconds to adjust
the drum balance block to a new position, instantaneously switching
plates with different size.
5 Accurate Graphic Size Calibration
CTP with external drum has many advantages. However, multichannel
scanning may cause the parallelograms distortion in the graphics.
Amsky’s unique technology of graphic calibration enables graphics
to present perfect rectangles and eliminates dimensional deviation
caused by different thickness of plates.The registering precision
of one Amsky CTP is 5 microns. Between two, it can be within 15
microns after being calibrated.
Discrete 400-410nm laser
Discrete 830nm laser
UV plate, high-sensitive PS plate
±5μm(Continuous exposure over four times on the same plate with a
temperature of 23°C and 60% RH )
USB2.0/USB3.0(Recommended option is USB2.0)
First manual, then autoload
Single phase:200V-240V; Max power(Peak value):4KW
Recommended temperature: 21-25°C Allowable temperature: 18-26°C